Subject | Text |
IBM G40 Monitor - Not working, - SERVICE MANUAL | [EMAIL me also at: [email protected] , I MAY not visit here again ;-< ]
My IBM G40 15 |
stereo fuses | This does not mean you have a bigger problem.
The "F" stands for fast blow and the "T" for time-del |
|
| hello! Just wondering if this orange Triplett Model 60 Multimeter is still available for sale? |
| the only advice i can give is to check that all the connectors are firmly pushed in check the fuses |
Re: panasonic tv - URGENT HELP PLEASE | [quote:35c3b5b82c="pun"]my panasonic tv ct-32sx12 won't turn on, it was working fine yesterday.....p |
| Try replacing C2455...it is off pin 3 of the flyback. The transistors that usually go bad are Q7460 |
| Hi there,
So u got any luck in your 2 dead receivers?
As for speaker wires, u can test with a |
| Hi,
It happens both when I am playing and even not when I am playing. It has worsened over time. |
| Thank you so much for the detailed answer.
I'll have a go at it over the weekend.
I might not ha |
No power - RCA TV Model P46730WK (rear projection) | Came back from vacation and tv would not turn on either by remote or on button. Nothing comes on. Un |
HP3478A, advance OS1000A and Meguro MO-1252A manuals needed | I need manuals (also service manuals) for:
Hewlett packard (aka Allegro) 3478A multimeter,
Advance |
Convergence problem | I have a convergence problem before and I replaced both cirucit stk392-120. After I replaced I do no |
| Yes, the F fuse is a fast acting fuse which is supposed to blow before damaging silicon devices like |
Infinity TSS-450 5.1 Surround Speaker System..diagnosis help | Hello,
I recently bought this set of speakers at a yardsale...
Infinity TSS-450 5.1 Surround Speak |
| Speakers and wiring are good. The distortion is there regardless of input - whether internal (tuner) |
No image on CRT. Please advise... | Guys, I need your help :cry:
I have a Hitachi CM776ET CRT Display.
Since a week ago it started g |
| i was reading that for testing mosfets here
http://www.uoguelph.ca/~antoon/gadgets/mostest.htm
|
|
| Hmmm. This could be a pain in the arse, but maybe not. It is possible that there is a missing low vo |
Need suggestions of multitest units like the elenco mx-9300B | Incase no one knows what this unit is, http://www.esssales.com/elenco/all-in-one.html
I need a te |
| Thanks for the reply!
I do no thave the schematic, and wasn't able to find it on this site. Howev |
| Which transistor blew? Was it a main output transistor or smaller one in the pre-amp stages? Why did |
dvd power suply problem | dear cam,
from ur observation as transforemer has 8 pins on each side,power supply appears to be |
| [quote:1c2dcfd480="Anonymous"]Thanks for the reply! Yes, it does make a clicking sound when turning |
check | if you have a multimeter ...check the output voltage ot the adaptor... be shure for right connection |
| Thanks for that, is it safe to test the 12v and 35v circuits with a multimeter? Im not going to get |
| The Vcc is +/- 36V DC which gives me a reading of 72V on the multimeter. Am I correct or not? :D |
a most siple ... | a most simple temperature interface is germanium transistor B,K, to multimeter.... but is better to |
DVD Player: "No disc" message when disc is on tray | Hi, I hope someone can help me with this.
I got a Coby DVD-223 some days ago, which wouldn't read D |
Canon IXUS700 repair,where are the fuses? help, heres pics. | Hi there.
I have a 7mp Canon IXUS 700, it was dropped by my brother. So cant be fixed under warra |
| Hi!
First what comes to mind is that power supply had gone bad. And so it
can be 2 cases:
1)The |